hpm_pwm_fault_t Struct Reference

PWM fault protection data structure ;PWM 故障保护数据结构 More...

#include <mp_common.h>

Data Fields
uint8_t	fault_level
	When a fault occurs, the PWM signal forced output is: 0- low level; 1- High level; 2- High resistance state ;故障发生时, PWM强制输出为: 0-低电平; 1-高电平; 2-高阻态;. More...
uint8_t	recovery_trigger
	0-Fault clears immediately upon resolution; 1-Fault clears upon the next reload after resolution; 2-Fault clears upon hardware-triggered recovery; 3-Fault clears upon software-triggered recovery ;0-故障解除立即恢复; 1-故障解除下一个reload恢复; 2-故障解除硬件触发恢复; 3-软件触发恢复; More...

Detailed Description

PWM fault protection data structure ;PWM 故障保护数据结构

Field Documentation

fault_level

uint8_t hpm_pwm_fault_t::fault_level

When a fault occurs, the PWM signal forced output is: 0- low level; 1- High level; 2- High resistance state ;故障发生时, PWM强制输出为: 0-低电平; 1-高电平; 2-高阻态;.

recovery_trigger

uint8_t hpm_pwm_fault_t::recovery_trigger

0-Fault clears immediately upon resolution; 1-Fault clears upon the next reload after resolution; 2-Fault clears upon hardware-triggered recovery; 3-Fault clears upon software-triggered recovery ;0-故障解除立即恢复; 1-故障解除下一个reload恢复; 2-故障解除硬件触发恢复; 3-软件触发恢复;

---

The documentation for this struct was generated from the following file:

• apps/mp_adapte/software/adapte/inc/mp_common.h