#include "board.h"
#include "hpm_debug_console.h"
#include "hpm_adc16_drv.h"
#include "hpm_pwm_drv.h"
#include "hpm_trgm_drv.h"
#include "hpm_trgmmux_src.h"
#include "hpm_dma_drv.h"
#include "hpm_dmamux_drv.h"
#include "adc_16_pmt.h"

Macros
#define	APP_ADC16_CORE HPM_CORE0

#define	APP_ADC16_SEQ_START_POS (0U)

#define	APP_ADC16_SEQ_IRQ_EVENT adc16_event_seq_single_complete

#define	APP_ADC16_SEQ_DMA_BUFF_LEN_IN_4BYTES (1024U)

#define	BOARD_APP_ADC16_PMT_PWM HPM_PWM0

#define	BOARD_APP_ADC16_PMT_TRGM HPM_TRGM0

#define	BOARD_APP_ADC16_PMT_TRGM_IN HPM_TRGM0_INPUT_SRC_PWM0_CH8REF

#define	BOARD_APP_ADC16_PMT_TRGM_OUT TRGM_TRGOCFG_ADCX_PTRGI0A

#define	APP_ADC16_PMT_PWM_REFCH_A (8U)

#define	APP_ADC16_PMT_PWM BOARD_APP_ADC16_PMT_PWM

#define	APP_ADC16_PMT_TRGM BOARD_APP_ADC16_PMT_TRGM

#define	APP_ADC16_PMT_TRGM_IN BOARD_APP_ADC16_PMT_TRGM_IN

#define	APP_ADC16_PMT_TRGM_OUT BOARD_APP_ADC16_PMT_TRGM_OUT

#define	APP_ADC16_PMT_TRIG_CH BOARD_APP_ADC16_PMT_TRIG_CH

#define	APP_ADC16_PMT_IRQ_EVENT adc16_event_trig_complete

#define	APP_ADC16_PMT_DMA_BUFF_LEN_IN_4BYTES ADC_SOC_PMT_MAX_DMA_BUFF_LEN_IN_4BYTES

#define	ADC_NOCACHE_RAM_SECTION __attribute__((section(".fast_ram")))

#define	ADC_NOCACHE_AHB_SECTION __attribute__((section(".ahb_sram")))

#define	ADC_ATTR_ALIGN(alignment) ATTR_ALIGN(alignment)

Functions
void	isr_adc16 (void)

void	isr_dma (void)

hpm_stat_t	process_pmt_data (uint32_t *buff, int32_t start_pos, uint32_t len)

void	hdma_dma_chain_config (void)
	HDMA chain transmission configuration.task 1:ADC sampling data is stored in the first half of the adc_buff;task 2:adc_done[0] set 1; task 3:ADC sampling data is stored in the second half of the adc_buff; tasj 4:adc_done[1] set 1; Each task is connected through a linked list adc_descriptors1 and executed in a sequential loop. ;HDMA链式传输配置。任务1：ADC采样数据存放至adc_buff前半部分；任务2：adc_done[0]置1；任务3：ADC采样数据存放至adc_buff前后半部分；任务4：adc_done[1]置1；各任务通过链表adc_descriptors1连接起来,按照顺序循环执行。 More...

void	hdma_auto_config (void)
	HDMA configuration: Configure HDMA chain transmission, including the data width, amount of data transmitted each time, and DMA transmission mode. ;HDMA配置：配置HDMA链式传输，配置HDMA传输的数据宽度、每次传输的数据量、DMA传输的模式等 More...

int	hdma_transfer_start (void)
	HDMA start transfer.enable HDMA and start transmitting data. ;HDMA开始传输：使能HDMA并开始传输数据。 More...

void	init_trigger_source (PWM_Type *ptr, uint32_t sample_freq)
	Initialize trigger source. ;初始化触发源PWM. More...

void	init_trigger_mux (TRGM_Type *ptr)
	Initialize TRGM. ;初始化互联管理器。 More...

void	init_trigger_target (ADC16_Type *ptr, uint8_t trig_ch, bool inten)
	Initialize trigger target. ;初始化触发目标。 More...

hpm_stat_t	init_common_config (adc16_conversion_mode_t conv_mode)
	Initialize ADC common configuration. ;初始化ADC通用配置。 More...

void	init_preemption_config (void)
	Initialize preemption conversion mode.Including trigger source initialization, trigger target initialization, TRGM initialization, and DMA initialization ;ADC抢占转换模式初始化，包括触发源初始化、触发目标初始化、互联管理器初始化和DMA初始化。 More...

void	preemption_handler (void)

void	adc_pmt_auto_config (uint32_t sample_freq)
	ADC preemption conversion mode configuration, including ADC pin initialization, ADC clock initialization, ADC common configuration, and ADC preemption conversion mode initialization ;ADC抢占转换模式配置，包括ADC引脚初始化、ADC时钟初始化、ADC通用配置和ADC抢占转换模式初始化。 More...

void	adc_clear_done (uint8_t index)
	adc_done flag clear: when adc_done flag is cleared, corresponding to the adc_buff data will be sent out via Ethernet ;adc_done标志位清除：当adc_done标志位被清除，对应的adc_buff数据将通过以太网发送出去。 More...

uint8_t	adc_get_done (uint8_t index)
	adc_done flag clear: when adc_done flag is 1, corresponding to the adc_buff data will be sent out via Ethernet. ;获取adc_done标志位：当adc_done标志位为1，对应的adc_buff数据将通过以太网发送出去。 More...

uint8_t *	adc_get_buf_addr_point (uint8_t index)
	get the starting address for sending data. ;获取发送数据的起始地址 More...

Variables
__IO uint8_t	seq_full_complete_flag

__IO uint8_t	trig_complete_flag

static uint32_t	adc_sample_freq = 0

Macro Definition Documentation

◆ ADC_ATTR_ALIGN

#define ADC_ATTR_ALIGN ( alignment ) ATTR_ALIGN(alignment)

◆ ADC_NOCACHE_AHB_SECTION

#define ADC_NOCACHE_AHB_SECTION __attribute__((section(".ahb_sram")))

◆ ADC_NOCACHE_RAM_SECTION

#define ADC_NOCACHE_RAM_SECTION __attribute__((section(".fast_ram")))

◆ APP_ADC16_CORE

#define APP_ADC16_CORE HPM_CORE0

◆ APP_ADC16_PMT_DMA_BUFF_LEN_IN_4BYTES

#define APP_ADC16_PMT_DMA_BUFF_LEN_IN_4BYTES ADC_SOC_PMT_MAX_DMA_BUFF_LEN_IN_4BYTES

◆ APP_ADC16_PMT_IRQ_EVENT

#define APP_ADC16_PMT_IRQ_EVENT adc16_event_trig_complete

◆ APP_ADC16_PMT_PWM

#define APP_ADC16_PMT_PWM BOARD_APP_ADC16_PMT_PWM

◆ APP_ADC16_PMT_PWM_REFCH_A

#define APP_ADC16_PMT_PWM_REFCH_A (8U)

◆ APP_ADC16_PMT_TRGM

#define APP_ADC16_PMT_TRGM BOARD_APP_ADC16_PMT_TRGM

◆ APP_ADC16_PMT_TRGM_IN

#define APP_ADC16_PMT_TRGM_IN BOARD_APP_ADC16_PMT_TRGM_IN

◆ APP_ADC16_PMT_TRGM_OUT

#define APP_ADC16_PMT_TRGM_OUT BOARD_APP_ADC16_PMT_TRGM_OUT

◆ APP_ADC16_PMT_TRIG_CH

#define APP_ADC16_PMT_TRIG_CH BOARD_APP_ADC16_PMT_TRIG_CH

◆ APP_ADC16_SEQ_DMA_BUFF_LEN_IN_4BYTES

#define APP_ADC16_SEQ_DMA_BUFF_LEN_IN_4BYTES (1024U)

◆ APP_ADC16_SEQ_IRQ_EVENT

#define APP_ADC16_SEQ_IRQ_EVENT adc16_event_seq_single_complete

◆ APP_ADC16_SEQ_START_POS

#define APP_ADC16_SEQ_START_POS (0U)

◆ BOARD_APP_ADC16_PMT_PWM

#define BOARD_APP_ADC16_PMT_PWM HPM_PWM0

◆ BOARD_APP_ADC16_PMT_TRGM

#define BOARD_APP_ADC16_PMT_TRGM HPM_TRGM0

◆ BOARD_APP_ADC16_PMT_TRGM_IN

#define BOARD_APP_ADC16_PMT_TRGM_IN HPM_TRGM0_INPUT_SRC_PWM0_CH8REF

◆ BOARD_APP_ADC16_PMT_TRGM_OUT

#define BOARD_APP_ADC16_PMT_TRGM_OUT TRGM_TRGOCFG_ADCX_PTRGI0A

Function Documentation

◆ isr_adc16()

void isr_adc16 ( void )

◆ isr_dma()

void isr_dma ( void )

◆ preemption_handler()

void preemption_handler ( void )

◆ process_pmt_data()

hpm_stat_t process_pmt_data	(	uint32_t *	buff,
		int32_t	start_pos,
		uint32_t	len
	)

Variable Documentation

◆ adc_sample_freq

uint32_t adc_sample_freq = 0

static

◆ seq_full_complete_flag

__IO uint8_t seq_full_complete_flag

◆ trig_complete_flag

__IO uint8_t trig_complete_flag

Macros

Functions

Variables